.png)
The key structures and designs of the Frame LoadPort are all independently carried out by Fortrend, and both the design and production are conducted within Fortrend's own production base. Integration of hardware and software ensures the standardization and consistency of the equipment.
.png)
| Equipment specification |
Equipment Size |
H 1349 mm * W 485 mm * L 594mm | |
| Equipment weight | 70 kg ± 0.5 kg（It varies depending on the configuration) | ||
| Rated voltage | DC 24 V | ||
| Rated current | 6 A | ||
| Rated power | 144W | ||
| Communication mode | Serial RS-232C, parallel I/0 | ||
| Communication protocol | HEX、ASCII | ||
| Work specification | Carrier size | Frame FOUP | |
| Load height | 900 mm ± 10 mm | ||
| Action cycle time | FOUP open | 11 sec（ with mapping ） | |
| FOUP close | 8 sec（ without mapping ） | ||
| Factory needs | CDA | 0.5 ~ 0.6 MPa ( Ø 6 air tube ) | |
| VAC | < - 80 kPa ( Ø 6 air tube ) | ||
| Optional component | AMHS Communication Port (E84) | ||
Disclaimer: The appearance, specifications, performance descriptions, comparative data, and other information regarding the products displayed on this website are based on internal testing and experiments conducted in FORTREND’s laboratory. This information is for reference purposes only, and the final product may vary.
Copyright © FORTREND. Any commercial promotion of goods or services, whether directly or indirectly to consumers on this website, is considered 'advertising' (excluding product-related information such as packaging, specifications, and after-sales support)
.jpg)
二工位产品中心白底图1420x750.jpg)
.jpg)
